Description

Part Number: SNO-N0050

Snow Performance Hyper-Sonic Water-Methanol Injection Nozzle (0.5 GPH)

Optimise fluid atomisation and boost intake cooling with the Snow Performance Hyper-Sonic 0.5 GPH water-methanol nozzle (SNO-N0050), designed for precise micro-dosing and maximum engine protection.

Key Features

☑ Hyper-Sonic Atomisation Technology: Spins fluid to supersonic velocity through dual venturi openings for an ultra-fine fog-like mist.
☑ Precision 0.5 GPH Rating: Delivers approximately 30-36 ml/min flow rate, ideal for smaller displacement engines or secondary staging.
☑ Integrated 100-Micron Filter: Removable stainless steel mesh filter prevents particles from clogging the nozzle orifice.
☑ 100% Methanol Compatible: Premium brass and nickel-plated construction resists corrosion from pure methanol solutions.
☑ Standard 1/8″ NPT Thread: Standard male threading ensures straightforward installation into nozzle holders, plates, and intake bungs.

Technical Specifications

Manufacturer	Snow Performance / Nitrous Express
Part Number	SNO-N0050
Nozzle Series	Hyper-Sonic Water-Methanol Injection Nozzle
Flow Rate	0.5 GPH (approx. 30-36 ml/min)
Thread Diameter	1/8″ NPT Male
Inlet Screen	100-Micron Cleanable Stainless Mesh Filter
Material	Corrosion-Resistant Nickel-Plated Brass
Fluid Compatibility	Water, Water-Methanol Mixtures (Up to 100% Methanol)

What’s Included in the Box

1x Snow Performance 0.5 GPH Hyper-Sonic Water-Methanol Nozzle (SNO-N0050)
1x Pre-Installed 100-Micron Stainless Steel Inlet Filter

As an official UK distributor for Snow Performance and Nitrous Express, JP Racing supplies verified water-methanol injection hardware backed by fast UK dispatch and dedicated technical support. Contact our technical team today for advice on matching nozzle sizing to your boost and horsepower targets.

Additional information

Weight	0.45 kg
Dimensions	10.16 × 12.7 × 15.24 cm

Frequently Asked Questions

The 0.5 GPH nozzle (approx. 30–36 ml/min flow rate) is designed for lower horsepower forced induction engines (typically under 200 BHP), small-displacement turbocharged builds, or as a secondary stage nozzle in multi-nozzle direct-port configurations where minimal fluid quantity and fine atomisation are essential.

The SNO-N0050 nozzle features standard male 1/8" NPT threads. It threads directly into standard Snow Performance nozzle holders, intake tract adapter bungs, or aftermarket injection plates. Always apply a methanol-compatible sealant or PTFE tape to the threads during installation.

The integrated 100-micron stainless steel filter screen located in the nozzle inlet can be gently removed using a fine pick or pliers. Flush the screen thoroughly with solvent or isopropyl alcohol to remove trapped debris, then re-seat it securely into the nozzle before reassembling.

Reviews

There are no reviews yet.

Be the first to review “Snow Performance Water Methanol Injection Nozzle 0.5 Gallons Per Hour (GPH)”

You must be logged in to post a review.

Snow Performance Water Methanol Injection Nozzle 0.5 Gallons Per Hour (GPH)

Description