TURBOSMART BlackBox Electronic Wastegate Controller

Description

TURBOSMART BlackBox Electronic Wastegate Controller

TURBOSMART BlackBox Electronic Wastegate Controller Overview Description: BlackBox Electronic Wastegate Controller Part Number: TS-0305-1001 Supplier: Turbosmart BlackBox by Turbosmart is a dedicated electronic wastegate controller with various factory, aftermarket, and Motorsport ECUs. The BlackBox protects from the current demands and translation of basic and more advanced boost control strategies into a gate position and can be used on single or twin electronic wastegate systems for the ultimate boost control. The BlackBox is a Dual Channel, current Capable H-Bridge Driver for use with the Turbosmart range of Electronic External Wastegates, including the StraightGate50 as well as our Electronic poppet style gates, including; CompGate40, HyperGate45, ProGate50 and PowerGate60 electronic Wastegates. The BlackBox is capable of multiple strategies and will accept PWM (Pulse Width Modulation) inputs as used for traditional boost control solenoids, 0-5v position target, CAN position target and CAN bus override for more advanced ECUs where control strategy can be developed natively. The Blackbox provides for auto-calibration of Electronic External Wastegates via a full sweep and includes over-temperature safety features using the temperature sensor inputs. The BlackBox is pre-configured with the flow vs. lifts calibration data of all Electronic Actuatuated Wastegates from Turbosmart for simple setup and accurate boost control. Settings can be adjusted via a simple USB connection and PC-based application, and unlimited control strategies can be implemented with the CAN-based override system, where your strategy is limited only by your ECU’s capability. Features Dual Channel High Current H-Bridge Outputs 2 x Wastegate Valve Position Inputs (0-5v) 2 x Wastegate Temperature Inputs (0-5v) 2 x Frequency Inputs (Advanced Wastegate Position Encoder) PWM Target Position Input  Analog 0-5v Position Target CAN Bus Position Demand Target CAN Bus Valve Area Target CAN Bus Programmable PID Mode Option Factory Loaded PID Calibration for all Turbosmart eGates Internal Over-Current Protection Internal Over-Temp Protection Auto Position Calibration Anodized Aluminium Housing 34 Pin Superseal Connector Fitment Requires Possible Fabrication and Qualified Calibration